5mm 3K Carbon Fiber Flat Sheet Tleqq/Matte
Dettall Qosor
Temm
Għoli Tleqq
Matte
Semi-matt
Nisġa
Twill/Sempliċi
Falsifikati
Unidirezzjonali
Ħxuna
Irqaq: 0.2mm
L-aktar ħoxna: 30mm
Personalizzat
Daqs
Regolari: 400 * 500mm
Daqs ieħor: 200 * 300mm
500 * 600mm jew personalizzati
Deskrizzjoni tal-prodott:
Għażla Toray jew Tairyfil materjal tal-fibra tal-karbonju li mill-Ġappun jew mit-Tajwan.
Kull fuljetta tal-fibra tal-karbonju hija fabbrikata b'saff wieħed ta 'saħħa għolja 100% prepreg tal-fibra tal-karbonju b'orjentazzjoni tal-fibra 0/90.
45 grad huwa disponibbli abbażi tal-ħtieġa tiegħek.
Teknoloġija speċjali tiżgura l-Tleqqija bla difetti fuq iż-żewġ naħat.
Id-daqs massimu huwa 1000 * 1500mm, il-ħxuna hija sa 15mm.
Offri servizz ta 'qtugħ CNC ibbażat fuq it-tpinġija tiegħek, iffirma ftehim NDA biex iżżomm sigriet tad-disinn tiegħek .
Nota: It-tolleranza tal-ħxuna tkun xi ftit akbar
Dimensjoni:
Applikazzjoni
5mm Carbon Fibre Sheets
-- are commonly used in various parts of drone frames, including the bottom plate, top plates, arms, and side plates. Here are some of the applications of 5mm carbon fiber sheets in these parts:
Bottom Plate: The bottom plate is the main structural component of the UAV/FPV/drone frame that provides support for the other components. 5mm carbon fiber sheets are often used as the bottom plate because they are strong enough to support the weight of the motors, battery, and other electronics while remaining lightweight. The stiffness of carbon fiber also helps to prevent flexing of the frame during flight, which can affect stability and maneuverability.
Top Plates: Top plates are used to protect the electronics and other components on the top of the drone frame. 5mm carbon fiber sheets are often used for this purpose because they provide a strong and rigid surface that can withstand impact and vibration. The stiffness of carbon fiber also helps to reduce the chances of damage to the components due to flexing or bending of the frame.
Arms: The arms of a drone frame connect the motors to the body of the drone. 5mm carbon fiber sheets are commonly used for the arms because they provide a strong and lightweight structure that can handle the stresses of flight. The stiffness of carbon fiber also helps to reduce the amount of flexing or vibration in the arms, which can improve the stability of the drone during flight.
Overall, the use of 5mm carbon fiber sheets in drone frames offers several advantages, including increased durability, improved flight performance, and reduced weight, which can lead to longer flight times and improved maneuverability. By using carbon fiber sheets in various parts of the drone frame, manufacturers can create a high-performance drone that is both strong and lightweight.